Cart
Free Shipping (U.S. 48 contiguous states ONLY)
-
Cost-effective, durable and easy to use
- Designed for a wide variety of force measurement applications; peak force, untimed average force, or timed 3-second average force
- Excellent for industrial or clinical ergonomic analysis
- NIOSH whole body or job specific static strength testing
- Two operating test models
- Four selectable threshold settings
- Force readings in pounds, kilograms or Newtons
The ergoFET500 Push & Pull Dynamometer by Hoggan Scientific is a cost-effective, durable and easy to use push pull force gauge designed for a wide variety of force measurement applications. It measures up to 500 pounds and is capable of peak force, untimed average force, or timed 3-second average force measurements. ergoFET500 is excellent for job site analysis or clinical use (e.g., static strength testing, FCE). View PDF of ergoFET500 data sheet.
Product Specifications
- 500 lb Capacity
- Rugged machined aluminum housing withstands heavy use in industrial settings
- Attractive professional look and design
- Can be used for a wide variety of force measurement applications, including peak force, or a 3 second averaged force
- Highly accurate internal load cell
- Easy to use and operate
- Large, easy to read crystal LCD display
- Dimensions: 6" L X 3" W x 13/8" H
- Weight: less than one lb.
- Displays real time force and peak force
- Offers two operation test modes:
- Un-timed test mode: Record and display peak force and an average force for tension or compression
- Timed (Static Strength Test) Mode: Record and display peak force and a 3 second average force over the last three seconds of a five second exertion for tension or compression
- 4 selectable threshed settings – 2 low and 2 high settings
- Low setting #1 Tension at 1.5 lbs, compression at 0.6 lbs
- Low setting #2 Tension at 5.0 lbs, compression at 2.0 lbs
- Low setting #1 Tension at 10.0 lbs, compression at 4.0 lbs
- Low setting #2 Tension at 15.0 lbs, compression at 6.0 lbs
- Measure and display peak force in pounds, newtons or kilograms
- Maximum force capacity for tension – 500 lbs, in 0.5 lb increments
- Maximum force capacity for compression – 200 lbs, in 0.2 lb. Increments
- Sampling Rate: 100 samples per second
- Auto power shut-off to extend battery life
- 2 year Warranty – Parts and Labor and 1st annual calibration included
Optional Upgrade Available! (software & interface box)
-
Software
-
provides for the recording, storage and recall of force tests performed
-
software screen displays average force, time, peak force and force/time curve of current test completed
-
generates force graphs for analyzing data
-
-
Interface box to allow for the transmission of data from load cell to PDA with software
Lead Times
- Hoggan Health products normal lead time for shipping can be up to 45 days
